In the joint connector, the pin should be transported to the absolute intensity will be open, but in the separation of the time easier. Therefore, to determine the connection of electrical connectors than the separation of the intensity to be more points.
Thus, the interaction between the insertion and removal of these forces can easily lead to loss of the connector. If you want to reduce the wear and tear, take a look at the following good methods:, can improve the contact surface of the gold-plated layer of strength, so that can effectively reduce the friction. , The contact surface can be nickel-plated and then gold-plated, so that the gold in the copper directly on the friction will be smaller.
1. The thicker the nickel layer, the stronger the wear resistance of the gold plating layer.
2. The surface is smoother, that is, the roughness is low, so the friction is very small.
3 in the usual transport connector on the way, pay attention to the electrical connector maintenance, reduce the human damage to the electrical connector.